Available 20 pcs.
Meross MSS550 Wi-Fi Smart Two-Way Light Switch (HomeKit)This smart three-way light switch will allow you to conveniently control your lights and even control them remotely. It works with the Meross app, as well as Apple HomeKit, Amazon Alexa, Google Assistant and Samsung SmartThings. Once you pair it with the assistant of your choice, you can also operate it with voice commands. No hub is required for it to work properly - all you need is a 2.4 GHz Wi-Fi connection and a neutral cable (white). Remote control of lightingWith the Meross MSS550 switch, you can easily turn your ordinary lighting into smart lighting. Among other things, the Meross app allows you to turn lights on and off remotely. You no longer have to worry if you forget to turn off the lamp before leaving the house - just reach for your smartphone! It's also possible to create work schedules and timers - this way you can adjust the lighting even better to your lifestyle. Convenient smart home managementAre you already using some smart home management platform? We have good news for you! The Meross MSS550 Switch is compatible with Google Assistant, Samsung SmartThings, Apple HomeKit and Amazon Alexa. This means you can add it to the system you're using and conveniently operate all your smart devices from a single app. You don't have to constantly switch between windows! Voice control capabilityCompatibility with Google Assistant, Apple HomeKit and Amazon Alexa brings even more benefits. When you pair the switch with your smart assistant, you gain the ability to control the lighting with voice commands. Want to turn off the lights without having to get up from the comfort of your bed? Or maybe your hands are busy and you need to turn on a lamp? With the Meross MSS550, all it takes is a few words to adjust the lighting to your expectations! Created for your convenienceThree-way switches allow you to control the lighting from 2 different locations. For example, you can mount one unit on the first floor and another on the first floor to turn on the light when you climb the stairs and turn it off once you've gone upstairs. This will easily light your way after dark and avoid a dangerous fall. The switch also has a built-in LED indicator to make it easy to find in the dark. Easy installationInstallation and configuration of the switch will not cause you much trouble. The device is very easy to install and does not require you to buy any additional hubs. All you need is a neutral cable (white) and an existing Wi-Fi network. Note: the switch only works with 2.4 GHz Wi-Fi. It does not support 5 GHz. Included
|
| Meross |
| MSS550 |
| 90-125 V~, 50/60 Hz |
| 90-125 V~, 50/60 Hz 20 W max (INC), 150 W max (CFL and LED) |
| 1 On / Off button, press and hold for 5 seconds to restore factory settings |
| 1x LED status indicator |
| Approx. 10 x 4 x 4 cm (without front plate), approx. 12 x 7 x 4 cm (with front plate) |
| 1 internal antenna |
| IEEE 802.11 b/g/n, 2.4 GHz, 1T1R |
| Supports WEP 64/128 bit, WPA-PSK / WPA2-PSK *Does not support Wi-Fi Enterprise. |
| iOS 13.0 or later, Android 4.1 or later, existing Wi-Fi network |
| 0-40°C |
| -40-70°C |
| 10-90% (non-condensing) |
| 5-90% (non-condensing) |
| Meross |
| Apple HomeKit, Amazon Alexa, Google Assistant, Samsung SmartThings |
