Available 16 pcs.
Color: brown cover, raspberry hot water bottle Pattern: bear Capacity: 1L Material: rubber Cover material: polyester Type: hot water bottle with soft cover included IMPORTANT: do not use boiling water to fill hot water bottles Do not pour water completely, max. 2/3 of the neutrality of the hot water bottle Max. temperature: 60 degrees Dimensions of the hot water bottle in the cover: Total length: 28 cm Length without collar: 22 cm Length of the collar itself: 5.5 cm Total width: 17 cm Collar width: approx. 11 cm Thickness: 1 cm Cover dimensions: Total length: 27 cm Length without collar: 21.5 cm Collar length: 5.5 cm Total width: 18 cm Collar width at the narrowest point: 9 cm Collar width at the widest point: 12.5 cm Material thickness: 1.3 mm Dimensions of the hot water bottle itself: Total length: approx. 27 cm Length without collar: approx. 17.5 cm Collar length: approx. 9.5 cm Total width: approx. 15 cm Collar width at the narrowest point: 5 cm Collar width at the widest point: 8 cm Thickness: 6.5 mm Cork dimensions: Length: approx. 3.5 cm Width: approx. 3 cm Filler diameter: approx. 2 cm Additional information about the cover: Please wash by hand Cannot be bleached Cannot be tumble dried Ironing is not allowed Cannot be dry cleaned WARNING: Tighten the cap tightly enough. Hot water bottles can cause burns. Avoid prolonged direct contact with skin. Fill no more than 2/3 of the volume and let the air out. |